Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DIY Ultra Racing Anti-Roll Bar for Mirage Installation
10-19-2013, 11:05 PM
Post: #1
Information DIY Ultra Racing Anti-Roll Bar for Mirage Installation
Finally got a chance to install the ULTRA Racing Anti-Roll Bar.

This is relatively easy to do. Install time is around 30min max.

What you need:

Ultra Racing Anti-Roll Bar part# UR-AR19-422

Tools Needed:
- 2 jacks
- 17mm closed wrench
- 6mm Hex key
[Image: 10362083586_8cb121dc4c.jpg]

Optional Tools:
These tools will make installation easier.
- 1/2 Drive socket wrench
- 1/2 drive 17mm socket
- 1/2 drive Torque Wrench
[Image: 10362076414_b314c713e9.jpg]


1. Loosen up the bolts on the lower portion of the rear shock absorbers using a 17mm wrench.
[Image: 10362285313_a2506717bf_n.jpg][Image: 10362283733_fb8770d02a_n.jpg]

2. Jack up the car on both sides at the rear.

3. Remove the bolts on the lower portion of the rear shock absorbers with a 17mm wrench or socket wrench. At this point the rear lower spring mount will drop.

4. Jack up the car further to be able to remove the springs from the mounts.

5. Install the anti-sway bar brackets on the lower spring mount and the anti-roll bar using the 6mm Hex screw and 17mm socket wrench.
[Image: 10362090866_81bb49bf91_m.jpg][Image: 10362275063_c35bf07888_m.jpg]
[Image: 10362084155_337ed0d823.jpg]

6. Re-seat the the springs on the mounts and slowly lower the jack to clamp the springs to the spring mounts from the top and bottom.
[Image: 10362088536_86e2a46c3a_m.jpg][Image: 10362272833_e85e5d174d_m.jpg]

7. Re-insert the bolts of the shock absorbers and tighten. If you have a torque wrench tighten it with 35N-m of force.

Enjoy the ride...

[Image: 10362074635_c48b285910_z.jpg]

[Image: 14391356808_7fcff1e4d6_m.jpg]
Find all posts by this user
Like Post Quote this message in a reply
10-21-2013, 10:56 AM
Post: #2
RE: DIY Ultra Racing Anti-Roll Bar for Mirage Installation
Sir any first hand review?. BTW ang linis ng pang ilalim ng mirage mo 4 and also nice set of tools you have there especially the click type torque wrench 4
The following 1 user Likes NaimaRaiko's post:
gls2001

[img][Image: 6ig1af.jpg][/img]
Find all posts by this user
Like Post Quote this message in a reply
10-21-2013, 11:05 AM
Post: #3
RE: DIY Ultra Racing Anti-Roll Bar for Mirage Installation
grabe nga ang linis ng ilalim.

painted ba ang springs nito? pati ilalim?

Savannah White, GLX-CVT (Mitsumi)
[Image: mirage-white.png]
Find all posts by this user
Like Post Quote this message in a reply
10-21-2013, 11:32 AM
Post: #4
RE: DIY Ultra Racing Anti-Roll Bar for Mirage Installation
After driving for 2 days with the anti-roll bar, napansin ko lang na hindi na masyado ang body roll sa mga curves. Hindi na masyado nagle-lean on one side sa kurbada pag mabilis ka kumpara dati nung wala yung anti-roll bar.


(10-21-2013 10:56 AM)NaimaRaiko Wrote:  Sir any first hand review?. BTW ang linis ng pang ilalim ng mirage mo 4 and also nice set of tools you have there especially the click type torque wrench 4
After driving for 2 days with the anti-roll bar, napansin ko lang na hindi na masyado ang body roll sa mga curves. Hindi na masyado nagle-lean on one side sa kurbada pag mabilis ka kumpara dati nung wala yung anti-roll bar.

Matagal na ko naghahanap nung click type torque wrench, natyempuhan lang available sya sa TruValue sa Solenad.

(10-21-2013 11:05 AM)Deobulakenyo Wrote:  grabe nga ang linis ng ilalim.

painted ba ang springs nito? pati ilalim?

Sinabay ko lang linisin yung area na yan nung kinabit yung anti-roll bar. Yung springs after mahugasan and matuyo, nag-apply ako ng wax and meguair's trim protectant dun sa rubber parts. Yung exhaust nilinisan din tapos polish using Autosol stainless polish.

[Image: 10362097076_a051065a1b.jpg][Image: 10362088604_d7efe7b3aa.jpg]
[Image: 10362087744_4b18c90e0d.jpg]
The following 3 users Like gls2001's post:
jaycee, ilyontezuka, vanityQ

[Image: 14391356808_7fcff1e4d6_m.jpg]
Find all posts by this user
Like Post Quote this message in a reply
10-21-2013, 11:50 AM
Post: #5
RE: DIY Ultra Racing Anti-Roll Bar for Mirage Installation
Ako kasi sir kahit anong gawin kong dukwang sa ilalim di ko mapakintab ng ganyan yung spring at exhaust ko. Effective pala yung autosol a matry nga yan.

[img][Image: 6ig1af.jpg][/img]
Find all posts by this user
Like Post Quote this message in a reply
10-21-2013, 11:56 AM
Post: #6
RE: DIY Ultra Racing Anti-Roll Bar for Mirage Installation
(10-21-2013 11:50 AM)NaimaRaiko Wrote:  Ako kasi sir kahit anong gawin kong dukwang sa ilalim di ko mapakintab ng ganyan yung spring at exhaust ko. Effective pala yung autosol a matry nga yan.

Tyagaan lang yung paglinis sa area na yan. Ginamitan ko ng Degreaser/All Purpose Cleaner 1:1 yung ratio, soak for 1 minute sabay gamit ng lumang microfiber na damp sa all purpose cleaner then banlaw.

Yung Autosol polish naman, mga ilang circular motions din paglinis using microfiber cloth. Sabay buff para lalong kintab.

[Image: 14391356808_7fcff1e4d6_m.jpg]
Find all posts by this user
Like Post Quote this message in a reply
10-21-2013, 12:23 PM
Post: #7
RE: DIY Ultra Racing Anti-Roll Bar for Mirage Installation
Ako naman sir bottle brush para sa area na hard to reach like in between sa spring pati in between sa spoke ng mags sa loob, I can say mukha din malinis pero di makintab tulad ng ginawa mo. Matiyaga din kasi akong maglinis ng ilalim ng sasakyan pati sa pang ilalim sa harapan binu-brush ko din 4
The following 1 user Likes NaimaRaiko's post:
gls2001

[img][Image: 6ig1af.jpg][/img]
Find all posts by this user
Like Post Quote this message in a reply
10-21-2013, 01:14 PM
Post: #8
RE: DIY Ultra Racing Anti-Roll Bar for Mirage Installation
galing ng DIY sir joseph! ikaw dapat ang bigyan ng jacket! 4
The following 2 users Like john's post:
gls2001, Boyet

[Image: signature2_zps888c1767.jpg]
Visit this user's website Find all posts by this user
Like Post Quote this message in a reply
10-21-2013, 01:19 PM
Post: #9
RE: DIY Ultra Racing Anti-Roll Bar for Mirage Installation
(10-21-2013 01:14 PM)john Wrote:  galing ng DIY sir joseph! ikaw dapat ang bigyan ng jacket! 4

Prez John, happy to share for the club community.

[Image: 14391356808_7fcff1e4d6_m.jpg]
Find all posts by this user
Like Post Quote this message in a reply
10-21-2013, 01:20 PM
Post: #10
RE: DIY Ultra Racing Anti-Roll Bar for Mirage Installation
^Paano nyo nililinis ang ilalim? jina-jack nyo ba?

Savannah White, GLX-CVT (Mitsumi)
[Image: mirage-white.png]
Find all posts by this user
Like Post Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)

This forum uses Lukasz Tkacz MyBB addons.