Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Windshield Stopper
01-14-2015, 06:02 PM (This post was last modified: 01-14-2015 06:26 PM by jmac2010.)
Post: #1
Windshield Stopper
Hi mga mph,


I don't know where to ask this question so I decided to create a new thred.

I just got my Windshield replaced today. Now while I was driving going to work. I noticed na my konting squeeking/sticky sound. I hope na mawala yung squeeking sound soon. May question lang ako. Yung mga plastic sa lower part ng Windshield, Is it called Windshield stopper? And also I noticed na medyo may uwang or maluwag yung pagkaka kabit.

Does that factor in why my squeeking sound?
If may uwang, pde ba lagyan ng 3m tape or?
Pede ko palagyan ng sealant sa mga car shops?
Will the water go inside the engine bay or ma apektuhan yung loob?

Actually hindi naman yung base ng windshield stoper. yung sa lower right and left na brace lang yung medyo maluwag.

Thanks sa makaaksagot

[Image: IMG_20180618_180556__01_zpsedf5citb.jpg]
Find all posts by this user
Like Post Quote this message in a reply
01-14-2015, 06:13 PM
Post: #2
Re: Windshield Stopper
Siguro pwede ang sealant. But dond expect na maganda ang kalalabasan aesthetically. Mas manipis ba yung nakuha nyong windsheild?
Find all posts by this user
Like Post Quote this message in a reply
01-14-2015, 06:28 PM
Post: #3
RE: Windshield Stopper
@chronicle


OEM Windshield sya. Same yung mga markings ng lahat ng windows. I'm thinking kung pede ko ipa gawa sa mga shop na talagang nag kakabit ng windshield. papa seal ko lang yung area na yun.

[Image: IMG_20180618_180556__01_zpsedf5citb.jpg]
Find all posts by this user
Like Post Quote this message in a reply
01-14-2015, 06:51 PM
Post: #4
Re: Windshield Stopper
Our old car had its windshield replaced once, sadly, kahit anong adjust, di talaga lumalapat. We just poured sealant on the sides.

Try nyo paadjust ulit yan at baka makuha pa since yung sides lang ang may uwang as per your post. Last option na lang talaga ang sealant.
Find all posts by this user
Like Post Quote this message in a reply
01-14-2015, 07:30 PM (This post was last modified: 01-14-2015 07:50 PM by jmac2010.)
Post: #5
RE: Windshield Stopper
Figured it out. Actually ang hindi lumalapat is yung side moldings/garnish. Inspect ako kanina and puro siya clips lang. So adjust one side and nag clip lahat pero hindi lapat. Tried sa isang side pero ayaw talaga mag clip, so hindi sya lapat. Hindi ko na dadalin dun since ang layo nung dealer ko sakin. Bumili na din ako ng sealant and seal ko later para lumapat.

To no avail, LOL! tried and re fit yung side moldings/Garnish and talagang naka uwang siya. Though hindi maganda pag malapitan, Ok naman pag malayo. Haays! Sayang, ang ganda pa naman nung fit dati. Now medyo maluwag.

[Image: IMG_20180618_180556__01_zpsedf5citb.jpg]
Find all posts by this user
Like Post Quote this message in a reply
01-14-2015, 08:58 PM
Post: #6
RE: Windshield Stopper
lagyan mo na lang nang sticker or carbon fibre vinyl para matago yung sealant.
hehehe.
Find all posts by this user
Like Post Quote this message in a reply
01-14-2015, 10:42 PM
Post: #7
RE: Windshield Stopper
@chronicle,


Ok na din, hayaan ko nalang. sa 10k pms nalang paayos ko. wala naman prob kahit may uwang since dun din dumadaan yung water, aesthetics lang talaga kasi nga may uwang. Umay na ako dalin dun. Thanks sa advice, well magagamit ko yung sealant sa mga aquariums ko.

[Image: IMG_20180618_180556__01_zpsedf5citb.jpg]
Find all posts by this user
Like Post Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)

This forum uses Lukasz Tkacz MyBB addons.